Widening the trackwidth of Ockelbo 300

Chassie, Drivlina, osv
PoroFin
Inlägg: 9
Blev medlem: 29 jan 2019, 21:50

Widening the trackwidth of Ockelbo 300

Inlägg av PoroFin » 05 feb 2019, 15:22

Anyone here ever made their 300's trackwidth wider by removing the original spindles from inside the frame and attached em back, on outside of the frame ?

Looking for bit improved ability to turn, and using skis/leaf springs/schocks from model 4000.

Användarvisningsbild
SS440-80
Sponsor medlem
Sponsor medlem
Inlägg: 1550
Blev medlem: 04 jul 2008, 12:44
Ort: Säfsen

Re: Widening the trackwidth of Ockelbo 300

Inlägg av SS440-80 » 06 feb 2019, 18:57

Have not heard of anyone doing it like that. But there was brackets to mount between the spindle and leafspring on the ski, that gave couple of centimeters on each side.

PoroFin
Inlägg: 9
Blev medlem: 29 jan 2019, 21:50

Re: Widening the trackwidth of Ockelbo 300

Inlägg av PoroFin » 07 feb 2019, 00:03

Yea, ive used such "spacers" in old Yamaha 1-cyl SL but it changes the steering a bit awkward. My 300 will need bit of straightening and welding on its frames front area and ive thought that it would be good moment to try to truly widen the track width at same effort. I need to measure how much the spindles need to be "pulled away" from inside the frame, to get em fully out so that i dont need to carve any big holes in the hood but instead just enough for the steering arm and rod to clear.

PoroFin
Inlägg: 9
Blev medlem: 29 jan 2019, 21:50

Re: Widening the trackwidth of Ockelbo 300

Inlägg av PoroFin » 07 feb 2019, 00:35

Bild

PoroFin
Inlägg: 9
Blev medlem: 29 jan 2019, 21:50

Re: Widening the trackwidth of Ockelbo 300

Inlägg av PoroFin » 07 feb 2019, 00:36

Bild

http://www.4ever300.com/skotrar/bilder/ ... ering.html

This is the second pic of 2 pics i've found online, containing the modification i mean.

Skriv svar